GAN-based medical image small region forgery detection via a two-stage cascade framework.

Using generative adversarial network (GAN) Goodfellow et al. (2014) for data enhancement of medical images is significantly helpful for many computer-aided diagnosis (CAD) tasks. A new GAN-based automated tampering attack, like CT-GAN Mirsky et al. (2019), has emerged. It can inject or remove lung cancer lesions to CT scans. Because the tampering region may even account for less than 1% of the original image, even state-of-the-art methods are challenging to detect the traces of such tampering. This paper proposes a two-stage cascade framework to detect GAN-based medical image small region forgery like CT-GAN. In the local detection stage, we train the detector network with small sub-images so that interference information in authentic regions will not affect the detector. We use depthwise separable convolution and residual networks to prevent the detector from over-fitting and enhance the ability to find forged regions through the attention mechanism. The detection results of all sub-images in the same image will be combined into a heatmap. In the global classification stage, using gray-level co-occurrence matrix (GLCM) can better extract features of the heatmap. Because the shape and size of the tampered region are uncertain, we use hyperplanes in an infinite-dimensional space for classification. Our method can classify whether a CT image has been tampered and locate the tampered position. Sufficient experiments show that our method can achieve excellent performance than the state-of-the-art detection methods.

Moisture-Electric-Moisture-Sensitive Heterostructure Triggered Proton Hopping for Quality-Enhancing Moist-Electric Generator.

Moisture-enabled electricity (ME) is a method of converting the potential energy of water in the external environment into electrical energy through the interaction of functional materials with water molecules and can be directly applied to energy harvesting and signal expression. However, ME can be unreliable in numerous applications due to its sluggish response to moisture, thus sacrificing the value of fast energy harvesting and highly accurate information representation. Here, by constructing a moisture-electric-moisture-sensitive (ME-MS) heterostructure, we develop an efficient ME generator with ultra-fast electric response to moisture achieved by triggering Grotthuss protons hopping in the sensitized ZnO, which modulates the heterostructure built-in interfacial potential, enables quick response (0.435 s), an unprecedented ultra-fast response rate of 972.4 mV s-1, and a durable electrical signal output for 8 h without any attenuation. Our research provides an efficient way to generate electricity and important insight for a deeper understanding of the mechanisms of moisture-generated carrier migration in ME generator, which has a more comprehensive working scene and can serve as a typical model for human health monitoring and smart medical electronics design.

Anion Exchange Membranes Based on Bis-Imidazolium and Imidazolium-Functionalized Poly(phenylene oxide) for Vanadium Redox Flow Battery Applications.

Although the Nafion membrane has a high energy efficiency, long service life, and operational flexibility when applied for vanadium redox flow battery (VRFB) applications, its applications are limited due to its high vanadium permeability. In this study, anion exchange membranes (AEMs) based on poly(phenylene oxide) (PPO) with imidazolium and bis-imidazolium cations were prepared and used in VRFBs. PPO with long-pendant alkyl-side-chain bis-imidazolium cations (BImPPO) exhibits higher conductivity than the imidazolium-functionalized PPO with short chains (ImPPO). ImPPO and BImPPO have a lower vanadium permeability (3.2 × 10-9 and 2.9 × 10-9 cm2 s-1) than Nafion 212 (8.8 × 10-9 cm2 s-1) because the imidazolium cations are susceptible to the Donnan effect. Furthermore, under the current density of 140 mA cm-2, the VRFBs assembled with ImPPO- and BImPPO-based AEMs exhibited a Coulombic efficiency of 98.5% and 99.8%, respectively, both of which were higher than that of the Nafion212 membrane (95.8%). Bis-imidazolium cations with long-pendant alkyl side chains contribute to hydrophilic/hydrophobic phase separation in the membranes, thus improving the conductivity of membranes and the performance of VRFBs. The VRFB assembled with BImPPO exhibited a higher voltage efficiency (83.5%) at 140 mA cm-2 than that of ImPPO (77.2%). These results of the present study suggest that the BImPPO membranes are suitable for VRFB applications.

Baricitinib is potentially effective in the treatment of refractory livedoid vasculopathy.

Background: Livedoid vasculopathy is a rare, chronic, and recurrent disease with limited effective treatments. Its etiopathogenesis remains incompletely understood. Baricitinib, a selective Janus kinase 1 and 2 inhibitor, has been used to treat rheumatoid arthritis and could reduce the disease severity in patients with livedoid vasculopathy. Methods: We retrospectively observed eight patients who received 2 mg/day of baricitinib for the treatment of refractory livedoid vasculopathy. We evaluated their clinical scores before and after treatment to determine its effectiveness and safety. Results: Improvement in livedoid vasculopathy was observed with significant regression in the clinical scores after baricitinib treatment. The mean clinical scores were 7.0 ± 1.6 and 1.4 ± 1.2 before and after baricitinib treatment, respectively (P <0.01). Furthermore, six out of the eight patients achieved a clinical score of 0 or 2 after treatment. These scores indicated remission. Clinical findings, including erythema, ulceration, and pain, improved in all the patients. The remission times ranged from 3 to 13 weeks, with a mean remission time of 7.75 ± 3.45 weeks. There were no reports of adverse events in any patient. Conclusions: Our study showed that baricitinib treatment was safe and could significantly relieve the signs and symptoms of livedoid vasculopathy. However, randomized controlled studies should be conducted to confirm these results.

Co3O4-MoSe2@C nanocomposite as a multi-functional catalyst for electrochemical water splitting and lithium-oxygen battery.

Co3O4-MoSe2@C nanocomposite has been prepared by a convenient method via combining hydrothermally synthesized MoSe2@C and Co3O4. When catalyzing the hydrogen evolution reaction and oxygen evolution reaction, the catalyst features low overpotentials of 144 mV and 360 mV (both at 10 mA cm-2current density), respectively. It can also serve as the cathode in the lithium-oxygen battery and the device shows a low charging-discharging overpotential of 1.50 V with a stable performance of over 200 cycles at current density of 1000 mA g-1, shedding light on the design and synthesis of novel multifunctional electrocatalysts for energy conversions.

Fast constructing polarity-switchable zinc-bromine microbatteries with high areal energy density.

Microbatteries (MBs) are promising candidates to provide power for various miniaturized electronic devices, yet they generally suffer from complicated fabrication procedures and low areal energy density. Besides, all cathodes of current MBs are solid state, and the trade-off between areal capacity and reaction kinetics restricts their wide applications. Here, we propose a dual-plating strategy to facilely prepare zinc-bromine MBs (Zn-Br2 MBs) with a liquid cathode to achieve both high areal energy density and fast kinetics simultaneously. The Zn-Br2 MBs deliver a record high areal energy density of 3.6 mWh cm-2, almost an order of magnitude higher than available planar MBs. Meanwhile, they show a polarity-switchable feature to tolerate confusion of cathode and anode. This strategy could also be extended to other battery systems, such as Zn-I2 and Zn-MnO2 MBs. This work not only proposes an effective construction method for MBs but also enriches categories of microscale energy storage devices.

Fixture-free omnidirectional prestretching fabrication and integration of crumpled in-plane micro-supercapacitors.

Multidimensional folded structures with elasticity could provide spatial charge storage capability and shape adaptability for micro-supercapacitors (MSCs). Here, highly crumpled in-plane MSCs with superior conformality are fabricated in situ and integrated by a fixture-free omnidirectional elastic contraction strategy. Using carbon nanotube microelectrodes, a single crumpled MSC holds an ultrahigh volumetric capacitance of 9.3 F cm-3, and its total areal capacitance is 45 times greater than the initial state. Experimental and theoretical simulation methods indicate that strain-induced improvements of adsorption energy and conductance for crumpled microelectrodes are responsible for the prominent enhancement of electrochemical performance. With outstanding morphological randomicity, the integrated devices can serve as smart coatings in moving robots, withstanding extreme mechanical deformations. Notably, integration on a spherical surface is possible by using a spherical mask, in which a small area of the microdevice array (3.9 cm2) can produce a high output voltage of 100 V.

Enabling fast-charging selenium-based aqueous batteries via conversion reaction with copper ions.

Selenium (Se) is an appealing alternative cathode material for secondary battery systems that recently attracted research interests in the electrochemical energy storage field due to its high theoretical specific capacity and good electronic conductivity. However, despite the relevant capacity contents reported in the literature, Se-based cathodes generally show poor rate capability behavior. To circumvent this issue, we propose a series of selenium@carbon (Se@C) composite positive electrode active materials capable of delivering a four-electron redox reaction when placed in contact with an aqueous copper-ion electrolyte solution (i.e., 0.5 M CuSO4) and copper or zinc foils as negative electrodes. The lab-scale Zn | |Se@C cell delivers a discharge voltage of about 1.2 V at 0.5 A g-1 and an initial discharge capacity of 1263 mAh gSe-1. Interestingly, when a specific charging current of 6 A g-1 is applied, the Zn | |Se@C cell delivers a stable discharge capacity of around 900 mAh gSe-1 independently from the discharge rate. Via physicochemical characterizations and first-principle calculations, we demonstrate that battery performance is strongly associated with the reversible structural changes occurring at the Se-based cathode.

A Flexible Aqueous Zinc-Iodine Microbattery with Unprecedented Energy Density.

Currently, reported aqueous microbatteries (MBs) only show unsatisfactory electrochemical performance (≤120 mWh cm-3 volumetric energy density and <1000 µWh cm-2 areal energy density) and it remains challenging to develop durable aqueous MBs that can simultaneously offer both high volumetric and areal energy density. Herein, an in situ electrodeposition strategy is adopted to construct a flexible aqueous zinc-iodine MB (ZIDMB). Notably, the fabrication process well avoids the use of common additives (such as binders, conductive agents, and toxic solvent) and also bypasses subsequent time-consuming procedures such as grinding, coating, drying, etc., thus greatly simplifying the manufacture of the ZIDMB. Meanwhile, owing to the suppression of the shuttle effect of triiodide ions and the high ionic conductivity of the polyelectrolyte, the ZIDMB can simultaneously deliver record-high volumetric and areal energy densities of 1647.3 mWh cm-3 and 2339.1 µWh cm-2 , thus achieving values at least 13.5- and 2.3-fold better than those of best available aqueous MBs, respectively. This work affords an innovative strategy to construct an ideal micro-power-source for future miniaturized and integrated electronics.

Injectable hydrogel platform with biodegradable Dawson-type polyoxometalate and R848 for combinational photothermal-immunotherapy of cancer.

Photothermal therapy (PTT) is a powerful strategy for cancer treatment with minimal invasiveness but still limited by lack of long-term efficacy against tumor recurrence and toxicity concerns about the slow biodegradability of the PTT agents. Herein, an injectable hydrogel platform (R848/POM@GG) of gellan gum co-loaded with Dawson-type {P2Mo18} polyoxometalate (POM) and Toll-like receptors agonist resiquimod (R848) is developed for combinational photothermal-immunotherapy of cancer. The POM-based gellan gum hydrogel (POM@GG) exhibits high photothermal conversion efficiency (63.1%) at a safe power density of 0.3 W cm-2 and good photostability during five cycles. By further incorporation of R848, the obtained R848/POM@GG exerts synergetic photothermal-immunotherapy on solid tumors, giving a high tumor inhibition rate of 99.3% and negligible lung metastases in the breast cancer mice models. A strong antitumor immune system with significantly elevated TNF-α, IL-2, and IL-6 levels is activated by R848. Additionally, the POM clusters gradually degrade to nontoxic molybdate in the physiological environment. Overall, the injectable hydrogel platform of R848/POM@GG has great translational potential for localized antitumor treatments.

Microwave-Assisted Synthesis of Tris-Anderson Polyoxometalates for Facile CO2 Cycloaddition.

Four new tris-Anderson polyoxometalates (POMs), (NH4)4[ZnMo6O18(C4H8NO3)(OH)3]·4H2O (1), (NH4)4[CuMo6O18(C4H8NO3)(OH)3]·4H2O (2), (TBA)3(NH4)[ZnMo6O17(C5H9O3)2(OH)]·10H2O (3) (TBA = n-C16H36N), and (NH4)4[CuMo6O18(C5H9O3)2]·16H2O (4), were synthesized by a microwave-assisted method. Single-crystal X-ray diffraction revealed that 1 and 2 contained a tris (trihydroxyl organic compounds) ligand grafted on one side, while two tris ligands were grafted on two sides to form χ/δ and δ/δ isomers in 3 and 4, respectively. 1H and 13C NMR spectra of the χ/δ isomer 3 were obtained for the first time, with six methylenes showing six peaks in the 1H NMR spectrum and only four peaks in the 13C NMR spectrum. Mass spectrometry monitoring revealed that during the microwave-assistant process the tris ligand can graft onto POMs to form 1, while tris directly coordinates with metallic heteroatoms to form isopolymolybdates during the conventional reflux synthesis process. In addition, 1-4 can catalyze CO2 with epoxides into cyclic carbonates with high selectivity and yields at an atmospheric pressure of CO2, which is lower than the pressure of CO2 in other catalysis using POMs as catalysts. Furthermore, 1-4 showed good catalytic stability and cycling properties. Mechanism studies substantiated POMs cocatalyzed with Br- to improve the catalytic yields.

Polyaniline/reduced graphene oxide foams as metal-free cathodes for stable lithium-oxygen batteries.

Lithium-oxygen batteries (LOBs) are considered as next-generation energy storage devices owing to their high-energy densities, yet they generally suffer from low actual specific capacity and poor cycle performance. To solve these issues, a range of electrocatalysts have been introduced in the cathode to reduce the overpotential during charge/discharge cycles and minimize unwanted side reactions. Due to relative high costs and limited reserves of noble metals and their compounds, it is important to develop low-cost and efficient metal-free electrocatalysts. Here, we report a simple method to prepare three-dimensional porous polyaniline (PANI)/reduced graphene oxide foams (PPGFs) with different PANI contents via a two-step self-assembly process. When these foams are tested as the cathode in LOBs, the device using the PPGF with 50% PANI content exhibits a discharge capacity up to 36 010 mAh g-1 and an excellent cycling stability (260 cycles at 1000 mAh g-1 and 500 cycles at 500 mAh g-1), provid ing new insights into the design of next-generation metal-free cathodes for LOBs.

Di-aqua-bis-(4-ferrocenyl-1,1,1-tri-fluoro-4-oxobutan-2-olato)cobalt(II).

In the title compound, [CoFe2(C5H5)2(C9H5F3O2)2(H2O)2], the central Co atom has an octa-hedral coordination geometry defined by two chelating tri-fluoro-methyl-ß-diketone ferrocene ligands and two aqua ligands, with the latter in a cis disposition. The Cp rings in both ferrocene groupings are close to eclipsed. In the crystal, O-H⋯O hydrogen bonds link the mol-ecules into [100] chains.

Highly Selective Bifunctional Luminescent Sensor toward Nitrobenzene and Cu2+ Ion Based on Microporous Metal-Organic Frameworks: Synthesis, Structures, and Properties.

Two metal-organic frameworks (MOFs), namely, [Ni(DTP)(H2O)]n (I) and [Cd2(DTP)2(bibp)1.5]n (II) (H2DPT = 4'-(4-(3,5-dicarboxylphenoxy) phenyl)-4,2':6',4″-terpyridine; bibp = 1,3-di(1H-imidazol-1-yl)propane), that present structural diversity were solvothermally prepared. Single-crystal X-ray diffraction analysis indicates that they consist of {NiN2O4} building units (for I) and {CdO4N2} and {CdO3N3} building units (for II), which are further linked by multicarboxylate H2DPT to construct microporous three-dimensional frameworks. The remarkable character of these frameworks is that coordination polymer II demonstrates highly selective and sensitive bifunctional luminescent sensor toward nitrobenzene and Cu2+ ion. The fluorescence quenching mechanism of II caused by nitrobenzene is ascribed to electron transfer from electron-rich (II) to electron-deficient nitrobenzene. The result was also evidenced by the density functional theory. Furthermore, anti-ferromagnetic as well as electrochemical characters of Ni-MOF (I) were also investigated in this paper.